Precautions for hydraulic fluid accessories


Release time:

2024-01-17

When clamping the joint of the rubber hose, if the clamping size is too large, the inner rubber layer and winding steel wire of the hose will be broken, causing oil leakage. If the size is insufficient, if the pressure is too high during use, it will cause oil leakage, and even if the oil pressure is too high, the rubber hose joint will directly come out. If it hits the worker, it will cause injury or death.

When clamping the joint of the rubber hose, if the clamping size is too large, the inner rubber layer and winding steel wire of the hose will be broken, causing oil leakage. If the size is insufficient, if the pressure is too high during use, it will cause oil leakage, and even if the oil pressure is too high, the rubber hose joint will directly come out. If it hits the worker, it will cause injury or death. So please be sure to grasp the reasonable detention size, based on the shrinkage of the inner hole at the tail of the joint. The compression of the national standard joint is 0.1-0.4mm, and the compression of the ordinary joint is 0.1-1mm. Due to different manufacturers of rubber hoses and joint sleeves, their sizes also vary.